THE REVIVAL

DETAILS FOR THE DISCERNING DRIVER

OVERVIEW

The REVIVAL is a complete exterior and interior detail. Only under special circumstances will we perform interior-only details (i.e. raining or snowing) but typically, the REVIVAL will include a premium hand wash to ensure the entire vehicle has been thoroughly and properly cared for. Our focus is on fully reviving your vehicle, top to bottom, inside and out.

As a mobile service, we’ll work with you to schedule a date and time to arrive at your location and perform the detailing on site. Typically, we’ll arrive early in the morning for two reasons. Washing in shade is ideal for the paint as you don’t want premature drying to occur. Arriving early also give us as much time as possible to complete the detail. The REVIVAL typically takes anywhere from 5 to 8 hours to complete.

Prices start at $300 and increase based on size and condition of vehicle.

EXTERIOR

• INSPECTION

  The vehicle is thoroughly inspected for anything out of the ordinary. Rock chips, brittle weather stripping, or other sensitive areas are noted to ensure extra care is taken.

• ENGINE

  The engine bay is pressure washed at low PSI, foamed with a dedicated engine cleaning soap, then rinsed.

• WHEELS

  The wheels and wheel wells are rinsed, cleansed with dedicated wheel soaps, towels, and brushes, then rinsed again.

• PRE-FOAM

  With a foam cannon, a thick layer of active soap is applied to the vehicle to help break down stubborn dirt.

• PRE-RINSE

  The vehicle is thoroughly pressure washed to rinse away as much dirt as possible before a towel touches the paint. Any sensitive areas such as paint chips on the front are avoided to ensure no damage occurs.

• SPOT TREAT

  Any stubborn grime, such as bug guts or road tar, is addressed with specific cleaners to help break them down, then rinsed again.

• FOAM

  With a foam cannon, a thick layer of PH balanced soap is applied to the entire vehicle to provide optimal lubrication.

• CLEANSE

  Soft, small brushes are used to extract dirt from tight areas such as emblems and door jambs, and plush microfiber towels safely cleanse the paint and are rotated as needed with fresh, clean towels.

• RINSE

  The vehicle is pressure washed to rinse away the remaining soap residue.

• BLOW DRY

  Tight spots are carefully blown out with an compressed air to free any trapped water.

• TOWEL DRY

  Plush microfiber towels along with a drying lubricant are used to safely dry the paint and add protection.

• TIRE DRESSING

  A low shine dressing is applied to the tires to give the rubber a deep, rich, like-new finish.

• INSPECTION AND TOUCH UP

  The entire vehicle is inspected to ensure quality and a dedicated spray wax is used for any necessary touch ups.

INTERIOR

• INSPECTION

  The interior is inspected for anything out of the ordinary that may require special attention.

• PERSONAL ITEM AND GARBAGE REMOVAL

  Personal belongings and removable pieces such as floor mats are removed and set aside and loose garbage is placed in garbage bags.

• VACUUM

  An initial vacuum is performed to remove the majority of loose dirt.

• BLOW OUT

  A Tornador tool is used to effectively blow out dust, dirt, and pet hair from hard to reach areas. Care is taken to ensure no delicate parts are damaged from the high-pressure air.

• SECOND VACUUM

  Another quick vacuum removes dust that was freed from the Tornador.

• CARPETS AND SEATS

  Fabric surfaces in need of deep extraction cleaning are addressed early in the detail process to allow maximum drying time. Any surfaces that require degreasers or other stronger products are returned to a neutral PH once stains are removed.

• FULL CLEANSE

  All plastic, leather, and vinyl surfaces are thoroughly scrubbed clean with dedicated interior cleaners, brushes, and towels. Steam is used to maximize cleaning power on any stubborn stains.

• CONDITION

  To prevent premature drying and cracking, all leather surfaces are rejuvenated and protected with a dedicated leather conditioner.

• FINAL VACUUM

  A extremely thorough final vacuum removes any remaining dirt. If necessary, a Lilly Brush is also used to remove any remaining pet hairs.

• GLASS

  All windows are cleaned to a streak-free finish, inside and out.

• FINAL INSPECTION

  A thorough quality control inspection is the final step to ensure no spots are missed.